|
|
EPT
Home Page |
SPROCKETS and BUSHINGS
BROWNING Offers The World's Largest
Selection Of Application -- Matched, Shaft-Ready Sprockets
and Bushings
That's Your Assurance Of Maximum Drive
Efficiency At The Lowest Evaluated Cost. |
 |
You can choose from the world's largest selection
of high-quality, shaft-ready sprockets to solve all your
application problems. In-stock hardened sprockets, a
Browning specialty, are warranted to last at least twice as
long as the standard (un-hardened) mild steel sprockets
they replace. The result is increased chain life and
reduced downtime.
Additionally, you have the industry's broadest
selection of sprocket mounting choices. Sprockets are
available with three types of bushings to ensure secure
mounting to shaft: |
SPLIT TAPER® Bushing |
QD® Bushing |
TAPER BORE® Bushing |
|
| • |
Patented SPLIT TAPER®
Bushings — available in inch and metric sizes, as
well as with spline bores; bore range 1/4-10" |
| • |
QD® Bushings in 1/16
inch increments and metric sizes |
| • |
TAPER BORE® bushings
in the
same configurations |
| • |
Finished Bore Sprockets are available
with Hardened Teeth and 2 Setscrews for driver
size sprockets, (30 teeth and smaller) |
| • |
Minimum Bore Sprockets are provided from
stock to allow for our customers' requirements for
simple modifications with same day delivery
service |
| • |
Browning continues to provide custom
sprockets for a variety of applications up through
60" diameters |
| • |
The combination of the above provides one
of the broadest selection of stock sprockets in
the industry |
|
| SPROCKETS STANDARD &
HARDENED |
Bushing type hardened sprocket and Browning's
exclusive warranty (to last twice as long as a standard
sprocket) |
| |
No.
Strands |
Pitch
Range |
Bore
Range |
| Bushing Type |
1 |
35-200 |
3/8-5" |
| |
2 |
35-200 |
3/8-5 |
| 3 |
35-160 |
1/2-5 |
| 4 |
80-160 |
1-5 |
| Finished Bore |
1 |
35-100 |
3/8-2
7/16 |
| Type B Min. Bore |
1 |
25-240 |
1/4-6
3/4 |
| |
2 |
35-240 |
1/2-8
1/4 |
| 3 |
35-200 |
1/2-8
3/8 |
| 4 |
35-200 |
1/2-9
1/4 |
| Type A Steel
Plate |
1 |
25-240 |
|
| Type B Stainless
Steel |
1 |
25-80 |
1/4-2
5/8 |
| OTHER
SPROCKETS |
| Double Single
Sprockets |
|
40-100 |
3/8-3
3/4 |
| Extended
Pitch Sprockets |
|
2040-2080 |
3/8-2
11/16 |
| 2040-2082 |
5/8-3 |
| 2102 |
1
1/4-3 |
| Shear Pin
Sprockets & Hubs |
|
40-160 |
3/8-5 |
| Torque Limiters
& Sprockets |
|
35-80 |
1/2-2
1/2 |
| To
ensure optimum quality and reliability, Browning
uses precision gear checking quality techniques in
manufacturing these sprockets. *Split Taper -
#40 & #50 pitch only, balance of all bushed
sprockets - up through 30 teeth. |
|
|
|
|
© Emerson
Power Transmission Manufacturing, L.P. or affiliates 2002. All Rights
Reserved. |
|
|
|
|