Combiner Application Solutions

Combiner High speeds and maintaining chain height requirements create unique challenges in combiner applications. Emerson Power Transmission provides chain solutions that can help extend wear life. Emerson also offers a broad range of bearing and gearing solutions to help keep combiners running smoothly.
Morse Matveyor
CONVEYING COMPONENTS
  • Morse® Topveyor® chain features strong, light weight Delrin* Kevlar* (DK) material to deliver increased wear resistance and excellent coefficient of friction for difficult to handle PET bottle and dry running applications. Lower friction equals less down containers. The interchangeability of Topveyor means increased productivity without costly retrofits to existing tabletop combiners.
  • Morse® Matveyor® USP Series DK chain delivers the advantages of DK material in a thicker chain for extended wear while beveled edges accommodate height mismatch due to wear, regardless of speed and conveyor length, reducing required maintenance when running cans or bottles
  • Morse® Matveyor® USP Series DK chain was designed with more bottom surface area for longer wear life and less scheduled maintenance
CRFTC 		BEARING SOLUTIONS
Sealmaster® PN Gold Bearings
  • Patented, multiple lip high performance seal (HPS) design for proven performance in combiners that are soap-lubed and high pressure washed
  • Strong, high phosphorus, electroless, nickel coated steel insert resists corrosion better than most competitive inserts in soap-lubed and pressure washdown conditions
  • Passivated 316 stainless steel housing resists chemical corrosion in high pressure washdown environments
  • Reinforced composite plastic housings available to eliminate corrosion and provide housing strength comparable to cast iron units in washdown combiners
  • USDA/FDA-compliant, food grade, Sealmaster® GoldPlex®-FG H1 grease
  • End caps and backside shields are available if high pressure washdown is used to keep combiner sanitary
  • Extra wide outer race holds an increased grease charge for optimal lubrication on wet combiner applications
Sealmaster Reduced Maintenance Bearings
  • Low maintenance design works well for hard-to-reach depalletizer combiners
  • Tapered lands design allows for better lubricant recirculation during normal operation for longer life in "lubed for life" applications
  • Land riding retainer design allows for 360° lubricant circulation around rolling elements, thus improving overall bearing performance in "lubed for life" environments
  • Low drag, felt seal helps protect against dust and improves bearing life in depalletizer combiners
  • Bearings filled with GoldPlex®-HP grease for longer, cooler running operation
CRBFTS
Browning 3000
GEARING SOLUTIONS
  • Morse® stainless steel Raider® Plus worm gear reducers with 316 stainless steel for corrosion resistance in washdown combiner applications
  • Browning® Series 3000 helical inline, helical worm and helical bevel enclosed gearmotors and speed reducers for high efficiency, right angle solutions
  • Efficient right angle and parallel shaft gearmotors and speed reducers available with hollow shaft, patented tapered bushing system
    - Single reversible bushing
    - Tapered stabilizing ring minimizes wobble and fretting corrosion
    - Optional bushing end covers available
  • Series 3000 gearmotors and speed reducers available with 2-part epoxy or 3- part stainless steel paint as well as stainless output shafts
APPLICATION CONSIDERATIONS
The proper selection and application of power transmission products and components, including the related area of product safety, is the responsibility of the customer. Operating and performance requirements and potential associated issues will vary appreciably depending upon the use and application of such products and components. The scope of the technical and application information included in this publication is necessarily limited. Unusual operating environments and conditions, lubrication requirements, loading supports, and other factors can materially affect the application and operating results of the products and components and the customer should carefully review its requirements. Any technical advice or review furnished by Emerson Power Transmission Corporation and its divisions with respect to the use of products and components is given in good faith and without charge, and Emerson assumes no obligation or liability for the advice given, or results obtained, all such advice and review being given and accepted at customer's risk.

For a copy of our Standard Terms and Conditions of Sale, Disclaimers of Warranty, Limitation of Liability and Remedy, please contact Emerson Power Transmission Customer Service at 1-800-626-2120. These terms and conditions of sale, disclaimers and limitations of liability apply to any person who may buy, acquire or use an Emerson Power Transmission Corporation product referred to herein, including any person who buys from a licensed distributor of these branded products.

Emerson Power Transmission does not warrant the accuracy of the information contained in this document. All interchanges should be compared with actual current specifications and/or manufacturing drawings. For a copy of our standard terms and conditions, contact Emerson Power Transmission at 1-800-626-2120.

* The following trade names, trademarks and/or registered trademarks are used in this material by EPT/Emerson Power Transmission Corporation for comparison purposes only, are NOT owned or controlled by EPT/Emerson Power Transmission Corporation and are believed to be owned by the following parties: Dupont, Delrin and Kevlar: E.I. du Pont de Nemours and Company; TableTop: Rexnord Industries, Inc.

MORSE is a registered trademark of Borg-Warner Corporation used herein under license. The Emerson logo is a trademark and a service mark of Emerson Electric Co. Matveyor is a registered trademark of Regina-Emerson. © Emerson Power Transmission Manufacturing, L. P. or affiliates 2007. All rights reserved.
Footer