Rinser Application Solutions

Rinser

Wet environments and high speeds in rinser applications require equipment that can stand up to tough conditions. Emerson Power Transmission provides chain solutions for both inline and lowerator gripper rinsers. Emerson also offers a broad range of bearing and gearing solutions for rinser equipment.


Rinser


CONVEYING COMPONENTS
Morse® Topveyor® gripper chain
  • Gripper material exerts the right force reducing product deformation
  • Pliable rubber grippers retain shape and position
  • Gripper securely fastened to flight by a stainless steel pin that eliminates pop-offs and downtime
  • Fingers cover a larger area of containers - providing better handling
 SealMaster Rinser Bearing
Morse Gripper Chain
  • Stainless and carbon steel base chain options for mechanical strength and corrosion resistance
  • DK flights - a superior grade of DuPont Delrin* resin, reinforced with Kevlar*, provides low coefficient of friction, reduces elongation, reduces dusting and works well for applications where lubrication is difficult
Ultop* USP Series DK chain features low friction DK flights
Gripper Chain / Bearing
GEARING SOLUTIONS
Browning® Series 3000 helical, inline, helical worm and helical bevel, enclosed gearmotors and speed reducers
  • Wide range of gearing and input styles - gearmotor, input shaft, C-Face and scoop
  • Innovative, self locking tapered shaft connection also allows onsite motor replacement without removing oil or primary pinion for gearmotor economy with C-Face convenience
  • Broad line of motor ends - TEFC (single phase and 3 phase), explosionproof, Corro-Duty®, inverter duty, brakemotor
  • Efficient right angle and parallel shaft gearmotors and speed reducers available with hollow shaft, patented tapered bushing system
    - Single reversible bushing
    - Tapered stabilizing ring minimizes wobble and fretting corrosion
    - Optional bushing end covers available
  • Drop-in interchangeability with industry standard units
BEARING SOLUTIONS
Sealmaster® Rinser Bearings
  • Special rinser bearings for vertical shafts prevent water buildup on seals
  • Special turn disk bearings reduce misalignment to keep the wheels running true
Sealmaster PN Gold Bearings
  • Patented, multiple lip high performance seal (HPS) design for proven performance in combiners that are soap-lubed and high pressure washed
  • Strong, high phosphorus, electroless, nickel coated steel insert resists corrosion better than most competitive inserts in soap-lubed and pressure washdown conditions
  • Passivated 316 stainless steel housing resists chemical corrosion in high pressure washdown environments
Competitor Chain & Bearing
  • Reinforced composite plastic housings available to eliminate corrosion and provide housing strength comparable to cast iron units in washdown combiners
  • USDA/FDA-compliant, food grade, Sealmaster® GoldPlex®-FG H1 grease
  • End caps and backside shields are available if high pressure washdown is used to keep combiner sanitary
  • Extra wide outer race holds an increased grease charge for optimal lubrication on wet combiner applications

APPLICATION CONSIDERATIONS
The proper selection and application of power transmission products and components, including the related area of product safety, is the responsibility of the customer. Operating and performance requirements and potential associated issues will vary appreciably depending upon the use and application of such products and components. The scope of the technical and application information included in this publication is necessarily limited. Unusual operating environments and conditions, lubrication requirements, loading supports, and other factors can materially affect the application and operating results of the products and components and the customer should carefully review its requirements. Any technical advice or review furnished by Emerson Power Transmission Corporation and its divisions with respect to the use of products and components is given in good faith and without charge, and Emerson assumes no obligation or liability for the advice given, or results obtained, all such advice and review being given and accepted at customer's risk.

For a copy of our Standard Terms and Conditions of Sale, Disclaimers of Warranty, Limitation of Liability and Remedy, please contact Emerson Power Transmission Customer Service at 1-800-626-2120. These terms and conditions of sale, disclaimers and limitations of liability apply to any person who may buy, acquire or use an Emerson Power Transmission Corporation product referred to herein, including any person who buys from a licensed distributor of these branded products.

Emerson Power Transmission does not warrant the accuracy of the information contained in this document. All interchanges should be compared with actual current specifications and/or manufacturing drawings. For a copy of our standard terms and conditions, contact Emerson Power Transmission at 1-800-626-2120.

* The following trade names, trademarks and/or registered trademarks are used in this material by EPT/Emerson Power Transmission Corporation for comparison purposes only, are NOT owned or controlled by EPT/Emerson Power Transmission Corporation and are believed to be owned by the following parties: Ultop: UCC Corp.; Dupont, Delrin and Kevlar: E.I. du Pont de Nemours and Company; SEW: SEW-Eurodrive GMBH & Co.

MORSE is a registered trademark of Borg-Warner Corporation used herein under license. The Emerson logo is a trademark and a service mark of Emerson Electric Co. Corro-Duty is a registered trademark of Emerson Electric Co. © Emerson Power Transmission Manufacturing, L. P. or affiliates 2007. All rights reserved.


Application Footer