Seamer/Capper Application Solutions

Seamer
Whether you're running cans or plastic or glass bottles, beverage applications pose unique challenges. High speed equipment running in wet, soapy environments combined with aluminum, plastic and glass dust require the highest performance in tough conditions. Emerson Power Transmission provides a line of components designed for seamer, capper and crowner equipment. With a complete line of conveying components to accommodate high discharge chain cycle rates, as well as low maintenance bearing solutions for hard-to-reach locations, Emerson can meet your needs. Emerson also provides a full line of gearing to help increase the uptime of your plant.
Conveyor CONVEYING COMPONENTS
Morse® Topveyor® DK820K3 1/4, DK831K3 1/4, DK880TK3 1/2, DK880TK4 1/2
  • Dimensionally interchangeable and interlaceable with industry standard products
  • DK material reduces coefficient of friction contributing to improved container handling while increasing wear life in single file, high speed applications
Morse® Matveyor® USP Series in DK material
  • DK material reduces coefficient of friction contributing to improved container handling while increasing wear life in single file, high speed applications
  • ½" thick modules with large support area transfers wear over a large surface, reducing wear in single file, high speed applications
  • Less wear reduces maintenance needed to match height of transfer conveyors
  • DK material combined with the USP module design is durable in glass bottle crowner discharge conveyors
BEARING SOLUTIONS
Sealmaster® PN Gold Bearings
  • Patented, multiple lip high performance seal (HPS) design for proven performance in contaminated environments
  • High phosphorus, electroless nickel coated steel insert
  • Passivated 316 stainless steel housing resists corrosive, washdown environments
  • USDA/FDA-compliant, food grade, Sealmaster® GoldPlex®-FG H1 grease
CRFTC
Browning 3000 GEARING SOLUTIONS
Browning® Series 3000 and 7000 helical, inline, helical worm and helical bevel, enclosed gearmotors and speed reducers
  • Wide range of gearing and input styles - gearmotor, input shaft, C-Face and scoop
  • Efficient right angle and parallel shaft gearmotors and speed reducers available with hollow shaft, patented tapered bushing system
    - Single reversible bushing
    - Tapered stabilizing ring minimizes wobble and fretting corrosion
    - Optional bushing end covers available
  • Innovative, self locking tapered shaft connection also allows onsite motor replacement without removing oil or primary pinion for gearmotor economy with C-Face convenience
  • Broad line of motor ends - TEFC (single phase and 3 phase), explosionproof, Corro-Duty®, inverter duty, brakemotor
  • Variety of output arrangements, including footed and flange mounting, tapered bushed, finished bore and keyed output shaft designs, solid or hollow output shaft
  • Drop-in interchangeability with industry standard units
Morse Raider Morse® stainless steel Raider® worm gear reducers with double sealing on the input and output shafts helps to stop corrosion and guard against oil leaks in clean room environments

APPLICATION CONSIDERATIONS
The proper selection and application of power transmission products and components, including the related area of product safety, is the responsibility of the customer. Operating and performance requirements and potential associated issues will vary appreciably depending upon the use and application of such products and components. The scope of the technical and application information included in this publication is necessarily limited. Unusual operating environments and conditions, lubrication requirements, loading supports, and other factors can materially affect the application and operating results of the products and components and the customer should carefully review its requirements. Any technical advice or review furnished by Emerson Power Transmission Corporation and its divisions with respect to the use of products and components is given in good faith and without charge, and Emerson assumes no obligation or liability for the advice given, or results obtained, all such advice and review being given and accepted at customer's risk.

For a copy of our Standard Terms and Conditions of Sale, Disclaimers of Warranty, Limitation of Liability and Remedy, please contact Emerson Power Transmission Customer Service at 1-800-626-2120. These terms and conditions of sale, disclaimers and limitations of liability apply to any person who may buy, acquire or use an Emerson Power Transmission Corporation product referred to herein, including any person who buys from a licensed distributor of these branded products.

Emerson Power Transmission does not warrant the accuracy of the information contained in this document. All interchanges should be compared with actual current specifications and/or manufacturing drawings. For a copy of our standard terms and conditions, contact Emerson Power Transmission at 1-800-626-2120.

MORSE is a registered trademark of Borg-Warner Corporation used herein under license. The Emerson logo is a trademark and a service mark of Emerson Electric Co. Corro-Duty is a registered trademark of Emerson Electric Co. © Emerson Power Transmission Manufacturing, L. P. or affiliates 2007. All rights reserved.


Application Footer