Sealmaster Custom Select

Sealmaster Custom Select Bearings	Mounted Ball Bearing Homepage Literature \| Instruction Sheets \| CAD \| Smart Interchange \| Product Selection \| eCatalog
	Features & Benefits Sealmaster^® Custom Select^™ mounted ball bearings are available in a wide variety of features. Some of the standard suffixes used in the series include: High Temperature "HT" High temperature bearing with increased internal clearance to accommodate thermal expansion of components High temperature Nomex^* seal and high temperature synthetic grease Operating temperature ranges from 200°F to 400°F Dusty and dry environments High Temperature "HI" High temperature bearing with increased internal clearance to accommodate thermal expansion of components High temperature Nomex seal and Krytox-226 grease Operating temperature ranges from 200°F to 400°F Dusty and dry environments High performance bearing High Temperature Air Handling “HTA”* High temperature bearing with increased internal clearance to accommodate thermal expansion of components High temperature Nomex^* seal and high temperature synthetic grease Operating temperature ranges from 200°F to 400°F Dusty and dry environments Two stage noise testing verification procedure for quiet operation For standard operating temperatures, consider the Air Handling “CXU” option shown below. High Temperature High Contamination “HTC” High temperature bearing with increased internal clearance to accommodate thermal expansion of components High temperature contact seal and high temperature synthetic grease Operating temperature ranges from 200°F to 400°F Wet and washdown environments Air Handling “CXU” Available with SKWEZLOC^® concentric 360° locking collars or double setscrew lock locking system Units are manufactured with a controlled air handling housing fit that allows the bearing to properly self-align when mounted on lightweight frames Available with the standard Sealmaster felt seal for decreased energy consumption (for a reduced drag option consider the High Speed “HS” shown below Two stage noise testing verification procedure for quiet operation For higher operating temperatures consider the Sealmaster Air Handling High Temperature “HTA” option shown above. High Speed “HS” Available in SKWEZLOC only Backed off, felt seal reduces contact area between the felt sealing material and the rotating metal flinger Units are manufactured with a controlled air handling housing fit that allows the bearing to properly self-align when mounted on lightweight frames Increased internal clearance to accommodate thermal expansion of components Operating conditions from -50°F to -200°F Low Drag “LO” Felt seal cut down to reduce drag Provides excellent barrier that works to retain grease and acts as a filter to reduce the ingress of debris contaminants Features a channeling grease that reduces drag while lubricating the bearing Operating temperature from -20°F to 180°F A reduced housing fit to allow for the bearing to misalign more easily in the housing X-Tra Low Drag “XLO” Felt seal cut down and oil soaked for extra low drag Oil lubricated Operating temperature from -30°F to 100°F For dry and dusty environments A reduced housing fit to allow for the bearing to misalign more easily in the housing Low Temperature “LT” Filled with synthetic, hydrocarbon lithium complex grease that allows oil to flow more easily at temperatures as low as -65°F High strength brass retainer won’t become brittle under low temperatures, unlike polymer retainer Internal clearance allows for internal expansion due to differential temperatures of components Optional fittings “CSK” Optional 90° grease fitting “CTJ” Optional adaptor and special plug “CSJ” Optional 45° grease fitting “W” Optional adaptor and special grease fitting “CTY” Optional plug for lubed-for-life bearings To specify a Custom Select bearing add the appropriate suffix code to the Sealmaster part description. Example: NP-16 HTA
	Industries Material handling Food processing Foundries Grain handling Agriculture	Applications Conveyors Bucket elevators Screens Mining machinery
	Nomex^® and Krytox^® are registered trademarks of E.J. DuPont de Nemours and Associates. These trademarks and/or trade names are used herein for comparison purposes only and are not trademarks and/or trade names in any way owned, controlled or associated with Emerson Power Transmission Corporation.