Sealmaster SKWEZLOC Mounted Ball Bearings

Mounted Ball Bearing Homepage
Literature | Instruction Sheets | CAD | Smart Interchange | Product Selection | eCatalog








Features & Benefits

  • Sealmaster® mounted ball bearings with SKWEZLOC® locking are available in a wide variety of features:
    • 3/4" - 2 7/16"
    • Standard and medium duty series>
    • All housing styles
    • ER type bearings with cylindrical OD
  • Sealmaster's patented SKWEZLOC locking collar centers the shaft in the bearing bore.
    • Secures the shaft with near perfect 360° concentricity
    • Results in quieter and smoother operation at higher speeds
    • Quickly, easily installed, removed and/or repositioned
    • Protects the shaft from scoring and burring
    • Reduces out-of-balance vibrational forces and fretting corrosion
    • Utilize a Torx* to allow for maximum torque resulting in superior holding power over traditional socket head cap screws.
  • Wide outer ring design provides increased grease capacity to lubricate the bearings.
  • Anti-rotation - pin & dimple system prevents the bearing OD from creep/rotation due to vibration over time while providing a full ± 2° of static misalignment.
  • Direct lube - pin & dimple system provides a direct lubrication path into the bearing, eliminating the need to channel grease around a lubrication groove common on standard mounted ball bearing units.
  • Felt labyrinth seal with rotating flinger directs contamination away from the sealing surfaces. Alternate seal options available upon request, see Sealmaster Custom SelectTM for more information.
  • Black oxide standard on inner/outer rings and seal components inhibits corrosion.
  • Zone hardened inner race provides a fully hardened ball path while leaving the race extensions unhardened, allowing better set screw holding power.
  • Length through bore is longer than most competitors for greater shaft stability.
  • Land-riding brass retainer has high strength, minimizes friction and provides maximum grease circulation.
  • Solid base, pillow block, cast iron housing provides improved stability and resistance to shock and vibration.
  • Permanent metal nameplate allows for easy identification after years of operation.
  • Factory-filled with Sealmaster GOLDPLEX® HP lithium complex NLGI 2 grease.

Industries

  • Waste water treatment/environmental
  • Warehousing
  • Parcel and package sorting
  • HVAC

Applications

  • Unit handling conveyors
  • Material handling
  • De-watering conveyors
Torx® is a registered trademark of Textron, Inc. This trademark and/or trade name is used herein for comparison purposes only and is not a trademark and/or trade name in any way owned, controlled or associated with Emerson Power Transmission Corporation.